High temperature heat transfer oil with strong performance,High thermal conductivity,Carrying a lot of heat,Low product viscosity,Even at low temperatures,the pumping capacity is very strong,Its low-temperature performance is good,Low freezing point is very suitable for use in cold regions and winter,At the same time,low toxicity, safety, reliability,and non flammability can ensure long-term operation of the device.  

High temperature heat transfer oil should be used safely,especially in accordance with the safety regulations for the use of high temperature heat transfer oil:

1.In accordance with the brand of heat transfer oil and the requirements of heat use process,correctly select various brands of high temperature heat transfer oil,strictly abide by the provisions in the safety technical regulations of Heat-transfer fluid,and correctly use the heat transfer oil;

2.Heat transfer oil should be carefully inspected during use to prevent water, acid, alkali, and low boiling point from leaking into the system in use. A filtering device should be installed to prevent mechanical debris from entering the system, thus ensuring the purity of the oil product;

3.High temperature heat transfer oil is more suitable for using coal, gas, and oil gas furnaces as carriers. In the use of heating equipment such as electric heating reactions, it is necessary to have expansion tanks, oil storage tanks, other safety components, temperature control instruments, and other supporting facilities to ensure safe operation;

4.When replacing the heating system with a new heat transfer oil, it is necessary to use a cleaning agent to clean the pipeline, eliminate impurities on the inner wall, and avoid affecting the heat transfer efficiency and service life of the heat transfer oil;

5.When the heat transfer oil is put into use, the circulating oil pump should be started to run normally for half an hour before ignition and heating up. The initial use should slowly increase the temperature by about 20 ℃ per hour. When the temperature rises by * * 130 ℃, it should be kept warm for a period of time. When the temperature rises by * * 180 ℃~200 ℃, it should be kept warm for another period of time before it can be put into normal use;

6.After using high-temperature heat transfer oil for six months, an oil analysis should be conducted. If the heat transfer effect is poor or some abnormal situations are found after long-term use, the solution should be based on the oil analysis results. At the same time, it is necessary to add some heat transfer oil or replace the heat transfer oil; The above content is about the relevant regulations and systems for the safe use of high-temperature heat transfer oil. As long as everyone follows these regulations and implements them, it can make the use of heat transfer oil longer, safer and more reliable